|
|
|
|
|
|
|
Modules of discrete control and input
|
 The modules are designed for discrete control of different loads and inquiries for status of discrete inputs through the interface RS485 or USB.
FUNCTIONAL CAPABILITIES: - 4 groups of contacts (relay) and 4 discreet inputs
- Maximum switching current is up to 5 A and voltage is up to 240 V
- Galvanically decoupled RS485 and USB 2.0 interfaces
- Can be used as USB to RS485 converter
- Ability to connect a number of devices to one bus
- Control via industry standard ModBus protocol
- Asynchronous registration of input events
- Relays can be flipped for a defined time interval by one command
- Access trough the virtual COM-port when connected to the PC by USB
- Galvanically decoupled inputs can be configured for dry contacts or as voltage inputs
- Reliable and practical enclosure that can be installed on DIN-rail
- Setting and test software for module is supplied
PARAMETERS OF CONTACT PAIRS: Number of contact pairs | 4 | Maximum switching voltage | 240 V | Maximum switching current | 5 А | Galvanic decoupling from other network nodes | >1000V | Mechanical reliability of contacts | 10 000 000 responses | Electrical strength of contacts | 10 000 responses | Versions of contact pairs | closed/open |
PARAMETERS OF DISCRETE INPUTS:
Number of inputs | 4 | Versions of inputs | | Commutation to ground: | | Internal tightening resistors | 2.2 kOm | Voltage of internal source | +4 V | | | | Galvanically independent inputs controlled by the voltage | | Voltage | +5/+12/+24 V | Overvoltage protection | <2Unom. | Galvanic decoupling from other network nodes | >1000 V |
RS485 INTERFACE PARAMETERS:
Supported speeds, baud | 4800, 9600, 14400, 57600, 19200, 38400, 115200 | Parity check modes | EVEN, ODD, NO | Galvanic decoupling from other network nodes | 1000 V | Electrostatic discharge protection | 20 kV |
INTERFACE PARAMETERS USB*: Specification | 2.0 | Electrostatic discharge protection | 20 kV | Galvanic decoupling from other nodes in a circuit | >1000V |
*Only for IO44DU module
POWER PARAMETERS:
Supply voltage | 10…30 V | Maximum consumption current | 150 mA | Power polarity changing protection | implemented |
Download short description (pdf, 440 kB) and full description (pdf, 790 kB). |
|
|
|
|
© 2024 Video Internet Technologies Ltd.
All rights reserved.
|
|
|
|
